PPS-SIL PPS-SIL protection sleeve is a combination of a braided glassfibre construction and a silicone rubber coating
 |
 |
You will need to allow pop-ups on your browser|
Product properties
The protection sleeve PPS-SIL is a combination of a braided glassfibre construction and a silicone rubber coating. This combination leads to a smooth and constant surface together with an excellent roundness. The roundness helps for an easy handling inside the cable harness protection assembly. The resistance against high temperatures and aggressive fluids or gases is nearly perfect. On request the PPS-SIL is available with a wide range of colors and for special application in self-extinguishing quality following
UL 1441 VW-1 or UL94-V0.
- Operating temperature –40 to 300 °C
special smooth, non sticky and constant silicone-coating, easy to assemble
- self-extinguishing according to UL
- wide range of colors
- physiologically and ecologically harmless
Technical Data
|
Dimension
|
Nominal diameter 0,5 – 60 mm, tolerances see table
rolled in production lengths or prepared for processing
|
|
Physically
|
continuous temperature resistance as DIN/IEC 216 (50% residual elongation): 3000h-180°C, 1000h-200°C, 30h-250°C, no significant changes within temperature scale; temperature resistance (short time) max. +300°C (special adjustment);
dielectric breakdown voltage at each point of the sleeve > 1,5 kV up to 8kV; can be produced in self-extinguishing quality as UL 94 V0; large scale of colors; resistant against UV- and gamma radiation and ozone
|
|
Chemically
|
resistant against fuel and lubricants in case of temporary influence;
excellent resistance against water, water-glycol-mixture and salt spray fog as well as cleaning agents of all kinds (soaps, cold cleaner, water steam)
|
|
Ecologically
|
components conform VDA requirements; IMDS listed under article no. ‚GS‘;
free of asbestos; glass fibre non-carcinogenic; ecologically desirable; no risk for water
|
|
Norm
|
Bosch N28-NS05..., Ford SJM-99D9720-A, VW 751 51, Delphi MS010021
|
| nom. ID |
(Ø) |
[mm] |
|
> 0,5
|
< 4,0
|
± 0,2
|
|
> 4,0
|
< 10,0
|
± 0,3
|
|
>10,0
|
<12,0
|
± 0,4
|
|
>12,0
|
< 17,0
|
± 0,5
|
|
>17,0
|
< 19,0
|
± 0,6
|
|
>19,0
|
< 24,0
|
± 0,7
|
|
>24,0
|
< 25,0
|
± 0,8
|
|
>25,0
|
< 30,0
|
± 1,0
|
|
>30,0
|
< 33,0
|
± 1,5
|
|
>33,0
|
< 60,0
|
± 2,5
|
