TWBM100 TWBM100 is an ultra thin wall polyolefin heatshrink medical tubing especially suited for medical applications requiring lubricity, flexibility and excellent electrical properties. It is a cost effective alternative to FEP and is also available with an adhesive liner. It is compatible with gamma and ETO sterilisation and has USP Class Vl approval.
Overview:
2.5:1 Shrink Ratio
Shrink Temperature >110oC
Ultra Thin Wall
Optional Adhesive Liner (3mm and above)
Compatible with Gamma and ETO Sterilisation
Operating Temperature -40oC to +105oC
TWBM100 is an ultra thin wall polyolefin tubing especially suited for medical applications requiring lubricity, flexibility and excellent electrical properties. It is a cost effective alternative to FEP and is also available with an adhesive liner. It is compatible with gamma and ETO sterilisation and has USP Class Vl approval.
Technical
|
General
Installation temperature
Longitudinal change
Concentricity
Tensile strength
Ultimate elongation
|
140oC
+0% -10%
60% minimum
20.7 MPa
200% minimum
|
|
Electrical
Dielectric strength
|
39.36 kV/mm minimum
|
|
Thermal
Heat ageing
|
168 hours at 125oC
|
|
Chemical
Fluid resistance
|
At 23oC for 24 hours for the following fluids:
Isopropyl alcohol
5% saline solution
Cidex
|
|
Specifications
FDA USP biological test classification VI
MAF 727
|
|
Ordering
|
Ordering Size (Inches)
|
Minimum ID Supplied (mm)
|
Maximum ID Recovered (mm)
|
Recovered Wall Thickness (mm)
|
Standard Spool Size (m)
|
|
1.0
|
1.00
|
0.45
|
0.25
|
1524
|
|
2.0
|
2.00
|
0.80
|
0.25
|
1524
|
|
3.0
|
3.00
|
1.20
|
0.25
|
762
|
|
6.0
|
6.00
|
2.40
|
0.25
|
457
|
|
10.0
|
10.00
|
4.00
|
0.36
|
381
|
Standard approved colours: Black and transparent.
Non-standard approved colours: Red, orange, yellow, blue and white.
Other colours to special quotation
Full details on technical specifications, test methods and values are available on request.
