PL-WM 3:1 The WM 3-1 Heat Shrinkable Wire Markers are made of a very flexible, highly flame retardant, high grade polyolefin tubing. SAE-AMS-DTL, UL224 and CSA recognized. Meets the requirements of a wide range of industrial and high-tech standards. Very versatile through excellent balance of chemical, electrical and mechanical properties
 |
 |
You will need to allow pop-ups on your browser
Standard colours
Yellow, white
Blue, red, black, orange, light green on request
Material
Crosslinked polyolefin, shrink ratio 3:1
Operating temperature
-55°C to +135°C
Minimum shrink temperature
90°C
Specifications
CSA C 22.2 No. 198.1: 125°C 600V VW-1,
SAE-AMS-DTL-23053/5 class 1&3 (except sizes / LC),
UL 224 125°C 600V VW-1 (File No. E48762
Storage
Store in original packaging.
Recommended temperature at +10°C to +25°C and 45-55% relative humidity
Use within 3 years from date of Manufacture.
Printer recommended
CAB A4+ 300dpi printer
Applications
Common uses include marking, insulation, Wire bundling and mechanical protection
Carrier liner
White, non-coated, medium range thermal sensitive paper cardstock.
Thickness 185 ± 10 μm. Width 109mm ± 0.5mm.
Adhesive backing
Clear, polyethylene film coated with an acrylic-based pressure sensitive adhesive.
Thickness 0.10mm. Width 72/85mm.
The products are supplied on a thermal sensitive cardstock liner converted into a ladder construction offering superb organization of the markers. The cardstock liner is die-cutted with cavities where into the sleeves are applied, supported by a backing adhesive.
Dimension Data
