PL-WM-ZH The WM Halogen Free Heat Shrinkable Wire Markers are made of halogen free, flame retardant, heat shrinkable polyolefin tubing with ideal printability properties for identification purposes.
The compound of the tubing is excluded for halogens and offers excellent fire safety characteristics combined with minimal smoke emission.
 |
 |
You will need to allow pop-ups on your browser
Standard colours
Yellow, white
Light blue, light red, black, orange, light green on request
Material
Polyolefin
Operating temperature
-30°C to +105°C
Minimum shrink temperature
>90°C
Specifications
Adherence: MIL-M 81531 AS
(SAE-AS81531-1998), point 4.6.2.
Passed with following black ribbons on white and yellow tubing: 379521, 356126 (FTI-M), 379804, 356294 (FTI-Y)
Passed with following white ribbon on black tubing: 361182
Passed with following red ribbon on white tubing: 379019
Resistance to solvents (recovered condition): MIL-STD.-202G test method 215 2002
(MIL-M81531/AS SAE-AS81531-1998 clause 3.4.3)
Passed with following black ribbons: 356294(FTI-Y), 356126 (FTI-M)
Passed with following red ribbon on white tubing: 379019
Passed with following white ribbon on black tubing: 361182
Tested according to: prEN 50343:2000, table 6 and point no. 7.6.2/7.6.3.
Passed with following ribbon: 356294(FTI-Y)
Storage
Store in original packaging.
Recommended temperature at +10°C to +25°C and 45-55% relative humidity
Use within 3 years from date of Manufacture.
Printer recommended
CAB A4+ 300dpi printer
Applications
Common uses include marking, insulation, Wire bundling and mechanical protection
Carrier liner
White, non-coated, medium range thermal sensitive paper cardstock.
Thickness 185 ± 10 μm. Width 109mm ± 0.5mm.
Adhesive backing
Clear, polyethylene film coated with an acrylic-based pressure sensitive adhesive.
Thickness 0.10mm. Width 72/85mm.
The products are supplied on a thermal sensitive cardstock liner converted into a ladder construction offering superb organization of the markers. The cardstock liner is die-cutted with cavities where into the sleeves are applied, supported by a backing adhesive.
Dimension Data
