PL-WM-LFH The WM - LFH Heat Shrinkable Wire Markers are made of halogen free, flame retardant and low smoke heat shrinkable polyolefin tubing with ideal printability properties for identification purposes.
The compound of the tubing is excluded for halogens and offers excellent low fire hazard characteristics combined with minimal smoke emission.
 |
 |
You will need to allow pop-ups on your browser
Standard colours
Yellow and white
Material
Radiation cross linked polyolefin, shrink ratio 2:1
Operating temperature
-40°C to +125°C
Minimum shrink temperature
>70°C
Specifications
Adherence: MIL-M 81531 AS
(SAE-AS81531-1998), point 4.6.2.
UL224 recognized file E203950
CSA certified file 220127
Storage
Store in original packaging.
Recommended temperature at +10°C to +25°C and 45-55% relative humidity
Use within 3 years from date of Manufacture.
Printer recommended
CAB A4+ 300dpi printer
Applications
Common uses include marking, insulation, wire bundling and mechanical protection.
Carrier liner
White, non-coated, medium range thermal sensitive paper cardstock.
Thickness 185 ± 10 μm. Width 109mm ± 0.5mm.
Adhesive backing
Clear, polyethylene film coated with an acrylic-based pressure sensitive adhesive.
Thickness 0.10mm. Width 72/85mm.
The products are supplied on a thermal sensitive cardstock liner converted into a ladder construction offering superb organization of the markers. The cardstock liner is die-cutted with cavities where into the sleeves are applied, supported by a backing adhesive.
Dimension Data
