 |
| Tuesday, February 07, 2012
|
|
|
|
|
|
|
 |
PMG Worldwide distributor of heat shrink tubing and braided sleeving
Call 0845 366 5840
|
|
|
|
|
|
|
 |
|
|
Product Selection Quick Links
|
|
|
|
|
|
|
|
|
|
|
|
Heat Shrink Product Information Table
|
|
|
|
|
|
Tubing Ref |
Description |
TypicalApplication |
Min Shrink Temp (Deg C) |
Cont Op Temp (Deg C) |
Expa
nded Diam (mm)
|
Shrink Ratio |
Flamm
ability
|
Dielec Strngth (Kv/ mm) |
StockColours |
Specs (full details on tech data sheet) |
|
Poly
vinyls
|
PVC105T |
Low cost PVC insulating tubing |
|
|
|
|
|
|
|
|
|
|
PVC105 |
Non irradiated, low cost, commercial, flexible tubing |
Bundling, insulation, protection and cosmetic applications |
140 |
-30 to +105 |
1.6 to 101.6 |
2:1 |
Self extinguishing |
20 |
Black, red, yellow, blue, white, clear |
|
|
Thin wall poly
olefins
|
LTF100
|
Flexible, commercial grade
|
Wide range of applications where cost is an important factor
|
100
|
-55 to + 125
|
1.2 to 101.6
|
2:1
|
Flame retardant
|
25
|
Black, brown. Red, orange yellow, green, blue, violet, grey, white, clear
|
AMS-DTL-23053 UL, CSA RoHS Compliant
|
|
|
PLF100
|
Flexible, military grade, multi purpose
|
Insulation, strain relief, identification of wires cables terminations, electrical and electronic components
|
100
|
-55 to +135
|
1.2 to 101.6
|
2:1
|
Highly flame retardant
|
25
|
Black, red, yellow, green; blue, white, clear
|
AMS-DTL-23053, Def-Stan UL, CSA, VG, VDE, BS RoHS Compliant
|
|
|
PLF GYS
|
Flexible, two colour
|
Earth identification of wires and cables
|
100
|
-55 to + 135
|
3.2 to 38.1
|
2:1 and 3:1
|
Highly flame retardant
|
25
|
Green/
yellow stripe
|
AMS-DTL-23053, Def-Stan UL, CSA, VG, VDE, BS RoHS Compliant
|
|
|
PLF103
|
Flexible, military grade, multi purpose
|
Insulation, strain relief, identification of wires cables terminations, electrical and electronic components where higher shrink ratio is required
|
100
|
-55 to +135
|
1.5 to 39
|
3:1
|
Highly flame retardant
|
25
|
Black, red, yellow, green; blue, white, clear
|
AMS-DTL-23053, Def-Stan UL, CSA, VG, VDE, BS RoHS Compliant
|
|
|
PLZH100
|
Zero halogen, flame retarded tubing
|
Insulation, strain relief, identification of wires cables, terminations, electrical and electronic components in confined space where toxicity is an issue
|
80
|
-40 to +105
|
3.2to 51
|
2:!
|
Flame retardant
|
15
|
Black, red, yellow, green; blue, white
|
BR, Def-Stan NS RoHS Compliant
|
|
|
SEC 150
|
Transparent, flame retarded, heat shrinkabe tubing
|
Insulation and strain relief, of wires cables terminations, electrical and electronic components where inpection of substrate is requried
|
125
|
-55 to +150
|
1.2 to 25.4
|
2:!
|
Flame retardant
|
15
|
Clear
|
AMS-DTL-23053 UL RoHS Compliant
|
|
|
CT300
|
Heat Shrinkable marker tubing
|
Identification tubing which is especially flattened for use under a print head for marking purposes
|
100
|
-55 to +135
|
3.2 to 50.8
|
3:1
|
Flame retardant
|
20
|
White, Yellow
|
UL,CSA RoHS Compliant
|
|
Dual wall poly
olefins
|
PLDW100
|
General purpose, adhesive lined, moisture resistant polyoelfin
|
Insulation and strain relief, of wires cables, terminations, electrical and electronic components where moisture protection is requried
|
80
|
-55 to +110
|
3 to 39
|
3:1
|
Flame retardant
|
12
|
Black and clear
|
AMS-DTL-23053 UL RoHS Compliant
|
|
|
PLDW104
|
4:1, adhesive lined, moisture resistant polyoelfin
|
Insulation and strain relief, of wires, cables, terminations, electrical and electronic components where moisture protection and a high shrink ration is required
|
80
|
-55 to +110
|
4 to 52
|
4:1
|
Flame retardant
|
12
|
Black and clear
|
AMS-DTL-23053 UL RoHS Compliant
|
|
|
SRDW100
|
Semi rigid tubing with a meltable inner wall
|
Insulation and strain relief, of wires, cables, terminations, electrical and electronic components where encapsulation of the component is required
|
125
|
-55 to +110
|
3.2 to 25.4
|
Up to 5:1
|
Flame retardant
|
20
|
Black
|
AMS-DTL-23053 UL RoHS Compliant
|
|
|
PLDW-TW
|
Thin wall, adhesive lined, moisutre resistant polyolefin
|
Insulation and strain relief, of wires, cables, terminations, electrical and electronic components where encapsulation combined with flexibility is required
|
80
|
-55 to +80
|
3 to 40
|
3:1
|
Flame retardant
|
12
|
Black
|
UL RoHS Compliant
|
|
Medical Grade Tubing
|
CCMB100
|
Medical Grade Polyolefin Tubing
|
Insulation, strain relief and colour coding in medical applications
|
90
|
70 to +105
|
1.6 to 25.4
|
2:1
|
Flame retardant
|
19.68
|
To special order
|
FDA USP Cl V1
|
|
|
FPBM100
|
High temperature Fluoropolymer to USP Cl Vi
|
Insulation and strain relief in medical applications, where wall thickness and/or high temperatures are important
|
110
|
-55 to +150
|
1.6 to 25.4
|
2:1
|
Flame retardant
|
19.68
|
To special order
|
FDA USP Cl V1
|
|
|
KBM100
|
High temperature electrical insulator approved to ISO 10993
|
Insulation and protection in medical applications where superior insulation, and high temperature withstand is required
|
155
|
-55 to + 175
|
1.6 to 25.4
|
2:1
|
Flame retardant
|
23.6 to 31.5
|
To special order
|
FDA USP Cl V1 ISO10993
|
|
|
TWBM100
|
Ultra thin wall tubing, approved to USP Cl V1
|
Insulation in medical applications where flexibility and lubricity are important
|
110
|
-40 to +105
|
1 to 10
|
2.5:1
|
Flame retardant
|
39.36
|
To special order
|
FDA USP Cl V1
|
|
MT-FEP |
Altera Medical-Grade, USP Class VI, Heat-Shrinkable FEP Tubing |
Process aid as well as electrical insulation, mechanical protection, and chemical resistance |
190 |
|
|
1.6:1 |
|
|
|
|
|
MT-LWA |
Altera Medical Grade, Laser-Welding Application Process Aid, Polyolefin Tubing |
Laser-welding operations of stents and balloons, hot jaw bonding or other secondary valueadded processes |
95 |
|
|
3:1 |
|
|
Clear only |
|
|
MT6000 |
Altera Medical Grade, Laser-Welding Application Process Aid, Polyolefin Tubing |
Electrical insulation performance and resistance to abrasion and harmful solvents. |
90 |
-70 to 90 |
|
4:1 |
|
|
Standard Black, clear
Nonstandard Blue, red, white, yellow, green |
|
|
MT-PBX |
Altera Medical-Grade, USP,Class VI, Heat Shrink Polyether Block Amide (PEBA) Tubing |
Excellent mechanical protection and resistance to abrasion as well as good electrical insulation performance. |
130 to 150 |
-70 to 130 |
|
2:1 |
|
|
|
|
|
High Perform
-ance Tubing
|
PLDR100
|
Flexible, chemical and abrasion resistant elastomer
|
Insulation, oil resistance and mechanical protection of cables and components
|
175
|
-75 to +150
|
3.2 to 76
|
2:1
|
Flame retardant
|
8
|
Black
|
AMS-DTL-23053, Def-Stan VG, VDE, BS RoHS Compliant
|
|
|
PLK175
|
High temperature fluid resistant polyvinylidene fluoride
|
Insulation and mechanical where high temperature and/or chemical resistance is required
|
155
|
-55 to + 175
|
1.2 to 38.1
|
2:1
|
Flame retardant
|
20 to 25
|
Clear
|
AMS-DTL-23053, Def-Stan UL, CSA, VG, VDE, BS RoHS Compliant
|
|
|
PLV200
|
High temperature, chemical resistant fluorelastomer
|
Insulation, chemical resistance and mechanical protection of cables and components in high temperature situations
|
100
|
-55 to + 200
|
3.2 to 51
|
2:1
|
Flame retardant
|
6
|
Black
|
AMS-DTL-23053, Def-Stan VG, VDE, BS RoHS Compliant
|
|
|
PSR200
|
Highly flexible, heat shrinkable, silicone rubber tubing
|
Insulation and bundling of cables where extreme physical strength and extreme temperatures are factors
|
135
|
-75 to +200
|
2.9 to 51
|
1.5:1
|
Flame retardant
|
10
|
Grey
|
UL RoHS Compliant
|
|
|
TFE250 4x
|
High etmperature, chemical resistant fluroplastic tubing
|
Insulation and protection in wide variety of aggressive situations
|
330
|
-67 to +250
|
3.17 to 25.4
|
4:1
|
Flame retardant
|
27.5
|
Clear
|
AMS-DTL-23053, Def-Stan BS RoHS Compliant
|
|
|
MicroTube
|
Small bore, high shrink ration tubing
|
Insulation, strain relief and protection where a micro bore construction is required Available in a variety of compounds, varies according to compound
|
|
|
|
|
Refer to full data sheet
|
|
|
Varies
|
|
Utility Products
|
PLF106
|
High shrink ratio tubing, with an optional adhesive liner
|
Mechanical protection to cable joints and terminations where a high shrink ratio is required
|
120
|
-55 to +110
|
19 to 119
|
6:1
|
Non flame retardant
|
20
|
Black
|
RoHS Compliant
|
|
|
PLM100(A)
|
Medium wall heat shrinkable polyolefin with an optional adhesive liner
|
Insulation, mechanical protection and strain for low voltage joints and cable repairs
|
125
|
-55 to +125
|
8 to 235
|
>3:1
|
Non flame retardant
|
20
|
Black
|
RoHS Compliant
|
|
|
PLT100(A)
|
Heavy wall heat shrinkable polyolefin with an optional adhesive liner
|
Insulation, mechanical protection and strain relief for low or medium voltage joints and cable repairs
|
110
|
-55 to +125
|
10 to 160
|
>3:1
|
Non flame retardant
|
>20
|
Black
|
RoHS Compliant
|
|
|
RPR
|
Adhesive lined, heat shrinkable, wraparound sleeve
|
Insulation, mechanical protection and strain relief for low voltage joints and cable repairs the application of a tube is not preferred
|
125
|
-55 to +125
|
12-150
|
>3:1
|
Non flame retardant
|
20
|
Black
|
RoHS Compliant
|
|
|
|
|
|
|
|
Identification Product Selection Table
|
|
|
|
|
|
Product Ref |
Description |
TypicalApplication |
Min Shrink Temp (Deg C) |
Cont Op Temp (Deg C) |
Expa
nded Diam (mm)
|
Shrink Ratio |
Flamm
ability
|
Dielec Strngth (Kv/ mm) |
StockColours |
Specs (full details on tech data sheet) |
| Identification Products |
PL-CM |
The CM – PUR Cable Markers are made of a thermoplastic polyether-polyurethane material, which is a halogen free, flame retardant, hydrolysis and micro organism resistant material. The raw material fulfills UL94-V0. |
Identification of cables and wires |
|
-25°C up to +80°C |
|
|
flame retardant |
|
White (PUM04) and yellow (PUM06).
Orange (PUM07), red (PUM05) and black (PUM09) on request |
- Adherence: MIL81531 (SAE-AS81531-1998 Clause 3.4.2/4.6.2)
Passed with following black ribbon: FTI-Y
- Resistance to solvents:
MIL-STD-202G test method 215(2002)
(MIL81531/SAE-AS81531-1998 Clause 3.4.3.)
Passed with following black ribbon: FTI-Y |
|
PL-CON |
Halogen Free Heat Shrinkable Endless Sleeving are made of halogen free, flame retardant, heat shrinkable polyolefin tubing
|
Prinable for Identification
|
>90°C |
-30°C to +105°C
|
|
|
Flame retardant
|
|
Yellow, white
Light blue, light red, black, orange, light green on request |
Adherence: MIL-M 81531 AS (SAE-AS81531-1998), point 4.6.2.
Passed with following black ribbons on white and yellow tubing: 379521, 356126 (FTI-M), 379804, 356294 (FTI-Y)
Passed with following white ribbon on black tubing: 361182
Passed with following red ribbon on white tubing: 379019
|
| |
PL-LAM |
Laminate identification marker |
Identification |
|
|
|
|
|
|
Transparent |
|
| |
PL-LSPP |
Thermal transfer printable plates |
Printable identification plates |
|
-40°C - +90°C |
|
|
|
|
White and metalized
Other colours available on request |
|
| |
PL-MTX |
Thermal transfer markers |
Efficient and cost-effective wire identification |
|
-40°C - +90°C |
|
|
|
|
White, yellow, red, blue and green |
RoHs-compliant |
| |
PL-STM |
Customized Stainless Steel Markers |
identification plates |
|
|
|
|
|
|
Stainless Steel |
|
| |
PL-TAG |
Identification Tag |
|
Application Temp >+10°C |
-10°C to +60°C |
|
|
|
|
Yellow |
DS 1094.4 |
| |
PL-WM 3:1 |
Heat Shrinkable Wire Markers - v flexible, high grade polyolefin tubing |
Wire markers |
90°C |
-55°C to +135°C |
|
|
highly flame retardant |
|
Yellow, white
Blue, red, black, orange, light green on request
|
CSA C 22.2 No. 198.1: 125°C 600V VW-1,
SAE-AMS-DTL-23053/5 class 1&3 (except sizes / LC),
UL 224 125°C 600V VW-1 (File No. E48762 |
| |
PL-WM-LFH |
Heat Shrinkable Wire Markers are made of halogen free, heat shrinkable polyolefin tubing |
|
>70°C |
-40°C to +125°C |
|
|
flame retardant and low smoke |
|
Yellow and white |
Adherence: MIL-M 81531 AS
(SAE-AS81531-1998), point 4.6.2.
UL224 recognized file E203950
CSA certified file 220127 |
| |
PL-WM-ZH |
Halogen Free Heat Shrinkable Wire Markers are made of heat shrinkable polyolefin tubing with ideal printability properties |
Identification purposes |
>90°C |
-30°C to +105°C |
|
|
flame retardant, |
|
Yellow, white
Light blue, light red, black, orange, light green on request |
Adherence: MIL-M 81531 AS
(SAE-AS81531-1998), point 4.6.2.
Passed with following black ribbons on white and yellow tubing: 379521, 356126 (FTI-M), 379804, 356294 (FTI-Y)
Passed with following white ribbon on black tubing: 361182
Passed with following red ribbon on white tubing: 379019
Resistance to solvents (recovered condition): MIL-STD.-202G test method 215 2002
(MIL-M81531/AS SAE-AS81531-1998 clause 3.4.3)
Passed with following black ribbons: 356294(FTI-Y), 356126 (FTI-M)
Passed with following red ribbon on white tubing: 379019
Passed with following white ribbon on black tubing: 361182
Tested according to: prEN 50343:2000, table 6 and point no. 7.6.2/7.6.3.
Passed with following ribbon: 356294(FTI-Y) |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|